Comments for HACKING MATERIALS https://hackingmaterials.com applying computing to materials design Wed, 04 Aug 2021 19:10:58 +0000 hourly 1 http://wordpress.com/ Comment on The Materials Paradox by Michael https://hackingmaterials.com/2015/09/11/the-materials-paradox/comment-page-1/#comment-4172 Wed, 04 Aug 2021 19:10:58 +0000 http://hackingmaterials.com/?p=1121#comment-4172 Hi,
That is a great post, but I think your Possibility 5 needs a bit of clarification. New materials MUST be compared to the existing competitors since any real material development is costly, and any investor is interested in a market share they can get right away. And it better be significant: ideally, your new material should allow them to form a monopoly eventually.

]]>
Comment on The Materials Paradox by Anubhav https://hackingmaterials.com/2015/09/11/the-materials-paradox/comment-page-1/#comment-3388 Wed, 02 Sep 2020 21:10:16 +0000 http://hackingmaterials.com/?p=1121#comment-3388 In reply to Steven Hartman.

Hi,

I’ve only publicly heard of one example making it all the way to commercialization using high-throughput screening – that is new alkaline battery chemistry for Duracell developed as part of a consulting project from UC Berkeley Professor Ceder and Professor Persson (among others). Professor Ceder also had novel high-rate Li-ion battery cathode coating that I heard got to pilot manufacturing stage but could not be synthesized reliably (work published in https://www.nature.com/articles/nature07853?free=2). I also know of another example that made it to a commercial product being sold to other businesses (but not directly to the consumer); it is unfortunately not public information, but was through consulting work with industry rather than pure academia projects later getting picked up by industry.

There has been other modeling work apart from high-throughput screening. Questek Materials has developed several alloys with the aid of modeling that has been picked up by industry. Citrine Informatics has also claimed to have used an ML model to help design new alloys for 3D printing, some information is here (https://citrine.io/first-to-market-high-strength-3d-printable-aluminum-alloy/).

From all the examples I am aware of, one of the major reasons for success has been lots of involvement and tinkering by the experimental groups such that the “final” compound is not always exactly the same as the “initial” prediction. That is, the initial prediction is more of a starting point that still requires a good amount of experimental followup and optimization and requires a lot of “hammering on” by a talented and dedicated experimentalist post prediction.

]]>
Comment on The Materials Paradox by Steven Hartman https://hackingmaterials.com/2015/09/11/the-materials-paradox/comment-page-1/#comment-3385 Sat, 29 Aug 2020 15:32:32 +0000 http://hackingmaterials.com/?p=1121#comment-3385 Hello,
I’m very interested in this question, and I enjoyed reading the article. In the 5 years since this was published, have you noticed any high-throughput-predicted materials finally exiting the materials pipeline into commercial application? If no, do you have any new insight on which of your six possibilities is the most important cause?

]]>
Comment on Phase diagram comic by Maxim Arsentev https://hackingmaterials.com/2014/05/08/pdcomic/comment-page-1/#comment-2240 Tue, 28 Aug 2018 12:49:46 +0000 http://hackingmaterials.com/?p=833#comment-2240 Super!

]]>
Comment on Phase diagram comic by Anubhav https://hackingmaterials.com/2014/05/08/pdcomic/comment-page-1/#comment-2237 Mon, 27 Aug 2018 18:36:51 +0000 http://hackingmaterials.com/?p=833#comment-2237 Ok I updated the code – discussion migrated to the gist itself (rather than the blog)

]]>
Comment on Phase diagram comic by Maxim Arsentev https://hackingmaterials.com/2014/05/08/pdcomic/comment-page-1/#comment-2235 Sat, 25 Aug 2018 11:50:08 +0000 http://hackingmaterials.com/?p=833#comment-2235 Hi Anubhav,
I’ve fixed it:
replace “from pymatgen.phasediagram.analyzer import PDAnalyzer
from pymatgen.phasediagram.maker import PhaseDiagram”
with
“from pymatgen.analysis.phase_diagram import PhaseDiagram”,
delete ” pda = PDAnalyzer(pd)”
replace “pda” with “pd”

]]>
Comment on Phase diagram comic by Maxim Arsentev https://hackingmaterials.com/2014/05/08/pdcomic/comment-page-1/#comment-2140 Wed, 13 Jun 2018 10:36:35 +0000 http://hackingmaterials.com/?p=833#comment-2140 Hi Anubhav,
The code “check_stability.py” is outdated and gives many errors, I believe this is due upgrades in pymatgen

]]>
Comment on Phase diagram comic by Maxim Arsentev https://hackingmaterials.com/2014/05/08/pdcomic/comment-page-1/#comment-1273 Fri, 28 Jul 2017 21:06:24 +0000 http://hackingmaterials.com/?p=833#comment-1273 Thank you again! Good luck to your project!

]]>
Comment on Phase diagram comic by Anubhav https://hackingmaterials.com/2014/05/08/pdcomic/comment-page-1/#comment-1272 Fri, 28 Jul 2017 18:28:07 +0000 http://hackingmaterials.com/?p=833#comment-1272 In reply to Maxim Arsentev.

I updated the gist, see Sun, W., Dacek, S. T., Ong, S. P., Hautier, G., Jain, A., Richards, W. D., Gamst, A. C., Persson, K. A. & Ceder, G. The thermodynamic scale of inorganic crystalline metastability. (2016).

]]>
Comment on Phase diagram comic by Maxim Arsentev https://hackingmaterials.com/2014/05/08/pdcomic/comment-page-1/#comment-1271 Fri, 28 Jul 2017 18:21:01 +0000 http://hackingmaterials.com/?p=833#comment-1271 Dear Anubhav,
Thank you a lot; using your code I was able to publish in a good journal
http://pubs.acs.org/doi/abs/10.1021/acs.jpcc.7b01575

My question is to the code “check_stability.py” and phrase in it: “decomposition energy less than about 0.100 eV/atom might be considered “metastability””
Could you give a reference for this phrase, if to write it to the “print” code it will be useful. The users will be able to read the corresponding paper or will be able to give a reference in their own papers.

The second question is to the same 0.100 eV/atom value. For the Li2MnSiO4 compound there is difficulty in obtaining single-phase product (several phases coexist) and the difference in energy between them is within 0.010 eV/atom.
For ZrO2 only single phase exist in this 0.010 eV/atom range and indeed it is single phase monoclinic form.

]]>